技术资料

当前位置: 首页 > 技术资料

水墨废水处理说明

水墨废水处理说明
Can be treated wastewater mainly comes from: 
1. The corrugated board production line of plastic plate, glue spreader and other cleaning wastewater; 
2. Water-based ink wastewater produced in the process of printing production line; 

Treated wastewater: 
But with my company CHJ/CQJ series glue making system implement weaver. 
1.The PH value and filter processing,nondiscoiouring processing,rubber recycing system; 
2. Adjust PH value, filtering. decoloring treatment, rubber recycling system; 
3. Adjust PH value, filtering, decoloring, biochemical treatment, reuse or discharge. 
 
USES the original ink wastewater solid-liquid separation technology,sufficient to ensure that the effluent SS to reach the level of emissions standards prescribed  by the state; 
To adopte advanced technology of coagulation decolorization processing, fully guarantee the shade of the water to reach the level of emissions standards prescribed by the state. 
Can  according to customers' different needs, the COD degradation degree of personalized design, omni-directional meets the customer's requirements; 
Can realize wastewater processing power immediately, boot process at any time at any time, do not need to walt for tuen long flocculation precipitation time; 
Realize the automatic control program.
可处理的废水主要来自: 
1.瓦楞纸板生产线的胶盘、涂胶辊等的清洗废水; 
2.印刷流水线生产过程中产生的水性油墨废水; 
处理后的污水: 
可与我公司系列制胶系统实现并机使用。 
1.进行PH值及过滤处理,不脱色处理,回用制胶; 
2.进行PH值调整、过滤、脱色处理,回用制胶; 
3.进行PH值调整、过滤、脱色、生化处理,回用或排放。 

水墨废水处理说明
★采用独创的油墨废水固液分离技术,充分保证出水的SS达到国家规定的一级排放标准;
★采用先进的混凝技术进行脱色处理,充分保证出水的色度达到国家规定的一级排放标准;
★能根据客户的不同需要,进行对COD降解程度的个性化设计,全方位满足客户的要求;
★可实现废水立即处理能力,随时开机随时处理,不需要等待屯长的絮凝沉淀时间; 
★实现全自动程序控制。 
 
点击查看:水墨污水处理设备
上一篇:强大的水墨污水处理设备的处理技术! 下一篇:没有了

推荐产品+ 更多